$43.86 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Colorado Springs, Colorado, United States
Ships to: US,
Item: 132670168033
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
MPN:4050-05
Nu Calgon:Nu Calgon
UPC:681001405058
eBay Climatedoctors.com OEM Parts Same Day Shipping Customer Support Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner 100% New OEM Parts Fast Shipping WELCOME TO OUR EBAY STORE climatedoctors Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner REFRIGERANT LEAK SEALANT • Strongest sealant on the market • Now made in the U.S.A. • Installs in seconds • Precise formula that creates a permanent seal • Polymer free • OEM approved not to clog manifold gauges • Works with all oils and refrigerants • Proven not to plug TXVs, cap tubes or pistons • New UV dye formula available for detection of larger leaks Now made in the U.S.A., EasySeal Direct Inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry’s leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal Direct Inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15). Concentrated formula means less material in system. Clear tube so you can see the sealant go in. No need to pump down R-410A units. Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. No injection hose or caulk gun needed. One time use. Directions This product must be used in accordance to the following directions by HVACR professionals only. Make sure system is running and low side and high side service ports are properly identified. If unit is a heat pump, be sure it is in cooling mode. IT IS IMPORTANT TO FIRST: Connect EasySeal Direct Inject’s female fitting to the suction service port of system. The one way check valve will prevent back flow of refrigerant. Make sure both valves on manifold gauge set are closed. Connect highside (red) line of manifold gauge set to the high side service port. Barely thread the middle manifold hose (yellow) to the male fitting of the EasySeal Direct Inject. Do not thread to the point of depressing the Schrader core. Briefly crack open high side manifold valve to purge air out of the yellow hose, close high side manifold valve, then quickly tighten yellow hose fitting to the injector. Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Direct Inject tube. With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Direct Inject to equalize to suction pressure. Disconnect EasySeal Direct Inject from suction service port and from manifold gauge set. Discard or recycle empty injector. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Direct Inject to service port and inject refrigerant through injector into system while charging. WARNING: Wear safety glasses. Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite Frequently Asked Questions: Do I need to pump down the system in order to get EasySeal Direct Inject into the system? No, unlike competitive sealants, you do not need to pump down the system regardless of what type of refrigerant is being used. Just connect EasySeal Direct Inject to the low side with the system running and inject into the system as instructed. Can I inject EasySeal Direct Inject while I am charging the system with refrigerant? Yes, you can use the refrigerant being added to push the sealant into the low side of the system. Is this product the same formula as pressurized can? It is the same EasySeal sealant, but at a much higher concentration. The EasySeal Direct Inject is designed to treat 1.5-5 ton systems just like the A/C EasySeal pressurized can (4050-06). The EasySeal-SS Direct Inject is designed to treat systems under 1.5 tons just like the A/C EasySeal-SS pressurized can (4050-01). Will EasySeal Direct Inject work on aluminum coils and microchannel coils? Yes, EasySeal Direct Inject is perfect for microchannel coils, all aluminum coils, mini splits, package units, and all other coil types. Does EasySeal Direct Inject travel with the refrigerant or the oil? EasySeal Direct Inject travels with the system’s refrigerant to find leaks fast. How small of a system can I use EasySeal-SS Direct Inject in? We recommend not using it in systems that hold less than 10 oz. of refrigerant. Can I use EasySeal Direct Inject in a system using a cap tube? Yes, you can use in a system with a cap tube, TEV, or piston style metering device. Does the female fitting on the EasySeal Direct Inject have a one-way check valve? Yes, it is designed to only allow EasySeal to flow into the low side of the system. Why is there a small bubble in the EasySeal Direct Inject tube? This small bubble is the dry dissolved gas in the EasySeal formula that is injected during the filling process. It insures a consistent fill rate and can vary in size slightly. Is EasySeal Direct Inject safe to use with my manifold? Yes, it is OEM approved not to damage analog or digital manifolds. Can I mix multiple internal treatments in the same system with EasySeal Direct Inject? You could mix other Nu-Calgon products like A/C Re~New or Rx-Acid Scavenger in the same system, as they have been tested compatible. However, we have not tested all competitive products and would not recommend adding others to the system. Can I refill the EasySeal Direct Inject tube instead of throwing it away after used? No, they are designed to be a one-time use injector but, the nylon, brass and aluminum can be recycled rather than thrown away. What size refrigerant leak will EasySeal Direct Inject repair? It will seal the smallest microleaks as well as much larger leaks that can be detected with gas leak detectors. In most cases, as long as the system’s entire charge is not lost in a week or less, EasySeal Direct Inject will fix the leak. Does EasySeal Direct Inject contain polymers? No, EasySeal is “polymer free” while in the tube and circulating through the system. How do I find leaks when using the EasySeal Direct Inject-UV? If larger leaks continue, use a UV light and glasses to scan the system for a bright yellow-green glow to show where the system is leaking. Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information. The SDS is available on the Nu-Calgon website. Payment Shipping Returns Refunds Contact Us About Us Payment Shipping Returns Refunds Contact Us About Us We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. **Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses. We combine shipping when possible. All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for and duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. Return Eligibility You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging. Returns will not be accepted on items that are: Opened or used Items cannot be returned once installed Missing their serial number or UPC Non-Returnable Items Returned more than 30 days after delivery Returned without notification Tools and Meters are exchangeable within 3 days of receipt. Non-Returnable Items Policy Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges: Replacement Parts Refrigerant Compressors Equipment Electrical Parts/Components Heating Parts/Components A/C Parts If you have a non-returnable item that arrived damaged or defective please contact us immediately. Restocking Fee All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in. Return Instructions To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you’ll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions). Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately. We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges. If you return an item that was opened or shows signs of wear, that item is not eligible for a refund. Products must be received at our returns processing facility before 30 days from the date of sale. You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details. Error Corrections & Term Amendments Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time. Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions! Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST. Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We’re family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We’re big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs! 100% New OEM Parts Fast Shipping Click here to see description BUY NOW! Payment Shipping Returns Payment Shipping Returns We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. If you purchase from us directly, we DO NOT charge sales tax. We offer Same Day shipping on all orders! We combine shipping when possible. All orders usually ship within 1 business day if placed before 2 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. If you are not 100% satisfied with your purchase, you can return the product and get a refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. All items are subject to a 20% restocking fee on new and unused items. OEM Parts Same Day Shipping Customer Support 100% New OEM Parts Fast Shipping WELCOME TO OUR EBAY STORE climatedoctors Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner REFRIGERANT LEAK SEALANT • Strongest sealant on the market • Now made in the U.S.A. • Installs in seconds • Precise formula that creates a permanent seal • Polymer free • OEM approved not to clog manifold gauges • Works with all oils and refrigerants • Proven not to plug TXVs, cap tubes or pistons • New UV dye formula available for detection of larger leaks Now made in the U.S.A., EasySeal Direct Inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry’s leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal Direct Inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15). —Concentrated formula means less material in system. —Clear tube so you can see the sealant go in. —No need to pump down R-410A units. —Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. —No injection hose or caulk gun needed. —One time use. Directions This product must be used in accordance to the following directions by HVACR professionals only. 1–Make sure system is running and low side and high side service ports are properly identified. If unit is a heat pump, be sure it is in cooling mode. IT IS IMPORTANT TO FIRST: Connect EasySeal Direct Inject’s female fitting to the suction service port of system. The one way check valve will prevent back flow of refrigerant. 2–Make sure both valves on manifold gauge set are closed. Connect highside (red) line of manifold gauge set to the high side service port. Barely thread the middle manifold hose (yellow) to the male fitting of the EasySeal Direct Inject. Do not thread to the point of depressing the Schrader core. Briefly crack open high side manifold valve to purge air out of the yellow hose, close high side manifold valve, then quickly tighten yellow hose fitting to the injector. 3–Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Direct Inject tube. With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Direct Inject to equalize to suction pressure. Disconnect EasySeal Direct Inject from suction service port and from manifold gauge set. Discard or recycle empty injector. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Direct Inject to service port and inject refrigerant through injector into system while charging. WARNING: Wear safety glasses. Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite Frequently Asked Questions: Do I need to pump down the system in order to get EasySeal Direct Inject into the system? No, unlike competitive sealants, you do not need to pump down the system regardless of what type of refrigerant is being used. Just connect EasySeal Direct Inject to the low side with the system running and inject into the system as instructed. Can I inject EasySeal Direct Inject while I am charging the system with refrigerant? Yes, you can use the refrigerant being added to push the sealant into the low side of the system. Is this product the same formula as pressurized can? It is the same EasySeal sealant, but at a much higher concentration. The EasySeal Direct Inject is designed to treat 1.5-5 ton systems just like the A/C EasySeal pressurized can (4050-06). The EasySeal-SS Direct Inject is designed to treat systems under 1.5 tons just like the A/C EasySeal-SS pressurized can (4050-01). Will EasySeal Direct Inject work on aluminum coils and microchannel coils? Yes, EasySeal Direct Inject is perfect for microchannel coils, all aluminum coils, mini splits, package units, and all other coil types. Does EasySeal Direct Inject travel with the refrigerant or the oil? EasySeal Direct Inject travels with the system’s refrigerant to find leaks fast. How small of a system can I use EasySeal-SS Direct Inject in? We recommend not using it in systems that hold less than 10 oz. of refrigerant. Can I use EasySeal Direct Inject in a system using a cap tube? Yes, you can use in a system with a cap tube, TEV, or piston style metering device. Does the female fitting on the EasySeal Direct Inject have a one-way check valve? Yes, it is designed to only allow EasySeal to flow into the low side of the system. Why is there a small bubble in the EasySeal Direct Inject tube? This small bubble is the dry dissolved gas in the EasySeal formula that is injected during the filling process. It insures a consistent fill rate and can vary in size slightly. Is EasySeal Direct Inject safe to use with my manifold? Yes, it is OEM approved not to damage analog or digital manifolds. Can I mix multiple internal treatments in the same system with EasySeal Direct Inject? You could mix other Nu-Calgon products like A/C Re~New or Rx-Acid Scavenger in the same system, as they have been tested compatible. However, we have not tested all competitive products and would not recommend adding others to the system. Can I refill the EasySeal Direct Inject tube instead of throwing it away after used? No, they are designed to be a one-time use injector but, the nylon, brass and aluminum can be recycled rather than thrown away. What size refrigerant leak will EasySeal Direct Inject repair? It will seal the smallest microleaks as well as much larger leaks that can be detected with gas leak detectors. In most cases, as long as the system’s entire charge is not lost in a week or less, EasySeal Direct Inject will fix the leak. Does EasySeal Direct Inject contain polymers? No, EasySeal is “polymer free” while in the tube and circulating through the system. How do I find leaks when using the EasySeal Direct Inject-UV? If larger leaks continue, use a UV light and glasses to scan the system for a bright yellow-green glow to show where the system is leaking. Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information. The SDS is available on the Nu-Calgon website. Payment Shipping Returns Refunds Contact Us About Us Payment Shipping Returns Refunds Contact Us About Us We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. **Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses. We combine shipping when possible. All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for and duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. Return Eligibility You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging. Returns will not be accepted on items that are: —Opened or used —Items cannot be returned once installed —Missing their serial number or UPC —Non-Returnable Items —Returned more than 30 days after delivery —Returned without notification Tools and Meters are exchangeable within 3 days of receipt. Non-Returnable Items Policy Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges: —Replacement Parts —Refrigerant —Compressors —Equipment —Electrical Parts/Components —Heating Parts/Components —A/C Parts If you have a non-returnable item that arrived damaged or defective please contact us immediately. Restocking Fee All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in. Return Instructions To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you’ll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions). Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately. We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges. If you return an item that was opened or shows signs of wear, that item is not eligible for a refund. Products must be received at our returns processing facility before 30 days from the date of sale. You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details. Error Corrections & Term Amendments Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time. Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions! Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST. Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We’re family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We’re big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs! 100% New OEM Parts Fast Shipping Click here to see description Climatedoctors.com Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner 100% New OEM Parts Fast Shipping WELCOME TO OUR EBAY STORE climatedoctors Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner REFRIGERANT LEAK SEALANT • Strongest sealant on the market • Now made in the U.S.A. • Installs in seconds • Precise formula that creates a permanent seal • Polymer free • OEM approved not to clog manifold gauges • Works with all oils and refrigerants • Proven not to plug TXVs, cap tubes or pistons • New UV dye formula available for detection of larger leaks Now made in the U.S.A., EasySeal Direct Inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry’s leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal Direct Inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15). Concentrated formula means less material in system. Clear tube so you can see the sealant go in. No need to pump down R-410A units. Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. No injection hose or caulk gun needed. One time use. Directions This product must be used in accordance to the following directions by HVACR professionals only. Make sure system is running and low side and high side service ports are properly identified. If unit is a heat pump, be sure it is in cooling mode. IT IS IMPORTANT TO FIRST: Connect EasySeal Direct Inject’s female fitting to the suction service port of system. The one way check valve will prevent back flow of refrigerant. Make sure both valves on manifold gauge set are closed. Connect highside (red) line of manifold gauge set to the high side service port. Barely thread the middle manifold hose (yellow) to the male fitting of the EasySeal Direct Inject. Do not thread to the point of depressing the Schrader core. Briefly crack open high side manifold valve to purge air out of the yellow hose, close high side manifold valve, then quickly tighten yellow hose fitting to the injector. Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Direct Inject tube. With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Direct Inject to equalize to suction pressure. Disconnect EasySeal Direct Inject from suction service port and from manifold gauge set. Discard or recycle empty injector. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Direct Inject to service port and inject refrigerant through injector into system while charging. WARNING: Wear safety glasses. Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite Frequently Asked Questions: Do I need to pump down the system in order to get EasySeal Direct Inject into the system? No, unlike competitive sealants, you do not need to pump down the system regardless of what type of refrigerant is being used. Just connect EasySeal Direct Inject to the low side with the system running and inject into the system as instructed. Can I inject EasySeal Direct Inject while I am charging the system with refrigerant? Yes, you can use the refrigerant being added to push the sealant into the low side of the system. Is this product the same formula as pressurized can? It is the same EasySeal sealant, but at a much higher concentration. The EasySeal Direct Inject is designed to treat 1.5-5 ton systems just like the A/C EasySeal pressurized can (4050-06). The EasySeal-SS Direct Inject is designed to treat systems under 1.5 tons just like the A/C EasySeal-SS pressurized can (4050-01). Will EasySeal Direct Inject work on aluminum coils and microchannel coils? Yes, EasySeal Direct Inject is perfect for microchannel coils, all aluminum coils, mini splits, package units, and all other coil types. Does EasySeal Direct Inject travel with the refrigerant or the oil? EasySeal Direct Inject travels with the system’s refrigerant to find leaks fast. How small of a system can I use EasySeal-SS Direct Inject in? We recommend not using it in systems that hold less than 10 oz. of refrigerant. Can I use EasySeal Direct Inject in a system using a cap tube? Yes, you can use in a system with a cap tube, TEV, or piston style metering device. Does the female fitting on the EasySeal Direct Inject have a one-way check valve? Yes, it is designed to only allow EasySeal to flow into the low side of the system. Why is there a small bubble in the EasySeal Direct Inject tube? This small bubble is the dry dissolved gas in the EasySeal formula that is injected during the filling process. It insures a consistent fill rate and can vary in size slightly. Is EasySeal Direct Inject safe to use with my manifold? Yes, it is OEM approved not to damage analog or digital manifolds. Can I mix multiple internal treatments in the same system with EasySeal Direct Inject? You could mix other Nu-Calgon products like A/C Re~New or Rx-Acid Scavenger in the same system, as they have been tested compatible. However, we have not tested all competitive products and would not recommend adding others to the system. Can I refill the EasySeal Direct Inject tube instead of throwing it away after used? No, they are designed to be a one-time use injector but, the nylon, brass and aluminum can be recycled rather than thrown away. What size refrigerant leak will EasySeal Direct Inject repair? It will seal the smallest microleaks as well as much larger leaks that can be detected with gas leak detectors. In most cases, as long as the system’s entire charge is not lost in a week or less, EasySeal Direct Inject will fix the leak. Does EasySeal Direct Inject contain polymers? No, EasySeal is “polymer free” while in the tube and circulating through the system. How do I find leaks when using the EasySeal Direct Inject-UV? If larger leaks continue, use a UV light and glasses to scan the system for a bright yellow-green glow to show where the system is leaking. Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information. The SDS is available on the Nu-Calgon website. Payment Shipping Returns Refunds Contact Us About Us Payment Shipping Returns Refunds Contact Us About Us We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. **Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses. We combine shipping when possible. All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for and duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. Return Eligibility You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging. Returns will not be accepted on items that are: Opened or used Items cannot be returned once installed Missing their serial number or UPC Non-Returnable Items Returned more than 30 days after delivery Returned without notification Tools and Meters are exchangeable within 3 days of receipt. Non-Returnable Items Policy Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges: Replacement Parts Refrigerant Compressors Equipment Electrical Parts/Components Heating Parts/Components A/C Parts If you have a non-returnable item that arrived damaged or defective please contact us immediately. Restocking Fee All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in. Return Instructions To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you’ll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions). Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately. We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges. If you return an item that was opened or shows signs of wear, that item is not eligible for a refund. Products must be received at our returns processing facility before 30 days from the date of sale. You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details. Error Corrections & Term Amendments Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time. Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions! Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST. Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We’re family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We’re big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs! 100% New OEM Parts Fast Shipping Click here to see description BUY NOW! Payment We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. If you purchase from us directly, we DO NOT charge sales tax. Shipping We offer Same Day shipping on all orders! We combine shipping when possible. All orders usually ship within 1 business day if placed before 2 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. All items are subject to a 20% restocking fee on new and unused items. OEM Parts Same Day Shipping Customer Support 100% New OEM Parts Fast Shipping WELCOME TO OUR EBAY STORE climatedoctors Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner REFRIGERANT LEAK SEALANT • Strongest sealant on the market • Now made in the U.S.A. • Installs in seconds • Precise formula that creates a permanent seal • Polymer free • OEM approved not to clog manifold gauges • Works with all oils and refrigerants • Proven not to plug TXVs, cap tubes or pistons • New UV dye formula available for detection of larger leaks Now made in the U.S.A., EasySeal Direct Inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry’s leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal Direct Inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15). Concentrated formula means less material in system. Clear tube so you can see the sealant go in. No need to pump down R-410A units. Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. No injection hose or caulk gun needed. One time use. Directions This product must be used in accordance to the following directions by HVACR professionals only. Make sure system is running and low side and high side service ports are properly identified. If unit is a heat pump, be sure it is in cooling mode. IT IS IMPORTANT TO FIRST: Connect EasySeal Direct Inject’s female fitting to the suction service port of system. The one way check valve will prevent back flow of refrigerant. Make sure both valves on manifold gauge set are closed. Connect highside (red) line of manifold gauge set to the high side service port. Barely thread the middle manifold hose (yellow) to the male fitting of the EasySeal Direct Inject. Do not thread to the point of depressing the Schrader core. Briefly crack open high side manifold valve to purge air out of the yellow hose, close high side manifold valve, then quickly tighten yellow hose fitting to the injector. Briefly open then close high side valve of the manifold gauge set to allow a little high side liquid to flow through the yellow hose and EasySeal Direct Inject tube. With high side valve of the manifold gauge set closed, wait one minute for the yellow hose and EasySeal Direct Inject to equalize to suction pressure. Disconnect EasySeal Direct Inject from suction service port and from manifold gauge set. Discard or recycle empty injector. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Direct Inject to service port and inject refrigerant through injector into system while charging. WARNING: Wear safety glasses. Do not bend, cut or deform EasySeal Direct Inject tube. Be careful not to allow refrigerant to spray on bare skin, as it could cause frostbite Frequently Asked Questions: Do I need to pump down the system in order to get EasySeal Direct Inject into the system? No, unlike competitive sealants, you do not need to pump down the system regardless of what type of refrigerant is being used. Just connect EasySeal Direct Inject to the low side with the system running and inject into the system as instructed. Can I inject EasySeal Direct Inject while I am charging the system with refrigerant? Yes, you can use the refrigerant being added to push the sealant into the low side of the system. Is this product the same formula as pressurized can? It is the same EasySeal sealant, but at a much higher concentration. The EasySeal Direct Inject is designed to treat 1.5-5 ton systems just like the A/C EasySeal pressurized can (4050-06). The EasySeal-SS Direct Inject is designed to treat systems under 1.5 tons just like the A/C EasySeal-SS pressurized can (4050-01). Will EasySeal Direct Inject work on aluminum coils and microchannel coils? Yes, EasySeal Direct Inject is perfect for microchannel coils, all aluminum coils, mini splits, package units, and all other coil types. Does EasySeal Direct Inject travel with the refrigerant or the oil? EasySeal Direct Inject travels with the system’s refrigerant to find leaks fast. How small of a system can I use EasySeal-SS Direct Inject in? We recommend not using it in systems that hold less than 10 oz. of refrigerant. Can I use EasySeal Direct Inject in a system using a cap tube? Yes, you can use in a system with a cap tube, TEV, or piston style metering device. Does the female fitting on the EasySeal Direct Inject have a one-way check valve? Yes, it is designed to only allow EasySeal to flow into the low side of the system. Why is there a small bubble in the EasySeal Direct Inject tube? This small bubble is the dry dissolved gas in the EasySeal formula that is injected during the filling process. It insures a consistent fill rate and can vary in size slightly. Is EasySeal Direct Inject safe to use with my manifold? Yes, it is OEM approved not to damage analog or digital manifolds. Can I mix multiple internal treatments in the same system with EasySeal Direct Inject? You could mix other Nu-Calgon products like A/C Re~New or Rx-Acid Scavenger in the same system, as they have been tested compatible. However, we have not tested all competitive products and would not recommend adding others to the system. Can I refill the EasySeal Direct Inject tube instead of throwing it away after used? No, they are designed to be a one-time use injector but, the nylon, brass and aluminum can be recycled rather than thrown away. What size refrigerant leak will EasySeal Direct Inject repair? It will seal the smallest microleaks as well as much larger leaks that can be detected with gas leak detectors. In most cases, as long as the system’s entire charge is not lost in a week or less, EasySeal Direct Inject will fix the leak. Does EasySeal Direct Inject contain polymers? No, EasySeal is “polymer free” while in the tube and circulating through the system. How do I find leaks when using the EasySeal Direct Inject-UV? If larger leaks continue, use a UV light and glasses to scan the system for a bright yellow-green glow to show where the system is leaking. Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information. The SDS is available on the Nu-Calgon website. Payment Shipping Returns Refunds Contact Us About Us Payment Shipping Returns Refunds Contact Us About Us We accept PayPal, wire transfers, and all major credit cards (Visa, MasterCard, American Express and Discover), as well as debit cards. For assistance with payment questions, quotes, and volume discounts, contact our Customer Support during normal business hours. **Please note that ClimateDoctors is required to charge 7.63% sales tax for shipments to Colorado addresses. We combine shipping when possible. All orders usually ship within 1 business day if placed before 3 p.m. EST. Shipment days are Monday through Friday. Tracking information is sent to you automatically at the time of shipment and is always available if needed. All orders are inspected prior to shipment and are insured against loss or damage in transit. All international customers are responsible for and duties and broker fees. Standard US shipping rates do not include Alaska and Hawaii. Please contact us for a shipping quote to these destinations. If there are any questions, please ask before you make a purchase and/or bid. Return Eligibility You may return most new, unopened items for a refund within 30 days of sale. All returns will be subject to a 20% restocking fee. These items should be in their original packaging and have their serial number or UPC intact. You must return items in new or unused condition with all original materials included with the shipment; thus, the merchandise must be returned in resalable condition: complete in original packaging, unused, and free from damage. All Item(s) must be returned in original condition, undamaged, unopened, unused and uncut complete in original packaging. Returns will not be accepted on items that are: Opened or used Items cannot be returned once installed Missing their serial number or UPC Non-Returnable Items Returned more than 30 days after delivery Returned without notification Tools and Meters are exchangeable within 3 days of receipt. Non-Returnable Items Policy Some of our products by their very nature are not returnable. The following items are non-returnable and do not qualify for refunds or exchanges: Replacement Parts Refrigerant Compressors Equipment Electrical Parts/Components Heating Parts/Components A/C Parts If you have a non-returnable item that arrived damaged or defective please contact us immediately. Restocking Fee All returns are subject to a 20% restocking fee unless other arrangements have been discussed prior to the return being sent in. Return Instructions To return new condition items by mail, send us an email and have your packing slip or order number handy. Once your return is approved, we will provide a return address, and you will receive a Return Merchandise Authorization (RMA) number that you’ll write directly on your shipment box. Finally, mail the packing slip along with purchased items, all their contents, and product packaging to the address provided to you. We must receive your returned items within 45 days of the date of sale (see Non-Returnable Items for exceptions). Damage may happen during shipping, and we apologize for the inconvenience this may cause. Please contact customer service if you have received damaged goods, and we will assist you immediately. We inspect all returned items when they arrive at our processing facility. If your return is a result of an error on the part of Climatedoctors, we will refund the full cost of the merchandise and original shipping charges. If you return an item that was opened or shows signs of wear, that item is not eligible for a refund. Products must be received at our returns processing facility before 30 days from the date of sale. You can expect your refund within four weeks from the date you return your package. In most cases you will receive a refund sooner, but we estimate four weeks because of the time required for return shipping (up to 14 days), product inspection at our returns facility (up to 5 business days), and processing from your bank or credit card company (up to 5 business days). All refunds are issued to the original method of payment unless you selected to return for in-store credit. Once your return is processed we will send you an email with your refund details. Error Corrections & Term Amendments Clerical or typographical errors may be found on this site. We reserve the right to correct any errors, inaccuracies, or omissions, and to amend our Return Policy and any information on our website at any time. Climate Doctors is committed to providing you with the best customer service and HVAC/R product knowledge in the industry. Our friendly Team is ready to help answer all your parts questions! Sales or Product Specialists are available: Monday-Friday: 9:00 a.m. to 5:00 p.m. CST. Climatedoctors serves both trade professionals and homeowners with the very best of brand name heating, air-conditioning (HVAC), refrigeration, HVAC equipment, tools and supplies. We can help with everything from large commercial projects to residential heating and air. We’re family owned and have continued to build our business on a firm foundation of integrity, commitment and trust. We’re big enough to provide a wide selection and competitive prices, but small enough to be flexible and responsive. Our family members (as we call our employees) develop long-term personal relationships with our customers. Some of our clients say that we know their needs almost better than they do, so let us begin to cure all of your comfort needs! 100% New OEM Parts Fast Shipping Click here to see description
Frequently Asked Questions About Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner in My Website
proorden.com is the best online shopping platform where you can buy Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner from renowned brand(s). proorden.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling Nu-Calgon 4050-05 EasySeal SS Direct Inject A/C Air Conditioner on proorden.com?
proorden.com helps you to shop online and delivers Valentino to your doorstep. The best-selling Valentino on proorden.com are: Valentino By Mario Valentino Fresia Sparkling Leather Sneaker Women’s Vintage V By Valentino For Women Eau De Toilette Spray 2.5oz New MISSING SPRAYER Valentino By Mario Valentino Handbag US 6 / EU 36 – Valentino Garavani Tan-Go Patent Leather Pump 70mm – Light Ivory valentino handbag black VALENTINO Rockstud Shoulder Bag S Leather Pink Red Valentino Gold Leather Stilettos Sandals(Size 7,37) Vendetta By Valentino For Women Mini EDT Splash 0.25oz New Sealed Vintage VALENTINO GARAVANI Rockstud Pumps Ivory Size 38 Made In ITALY Auth Valentino Garavani Womens Leather Pointed Toe Lace Up Stilettos Black Size 7 Valentino Upvillage Leather Sneaker Women’s VALENTINO CLASSIC BY VLENTINO 2.5 OZ/75 ML EDT SPRAY FOR WOMEN NEW NO BOX Valentino Beige Zipper pouch + Mini Born In Roma EDP 6ml + Mini Born In Roma EDT Valentino Donna Born in Roma Intense Eau de Parfum Spray 3.4 oz, New In Box Valentino Garavani Backnet Perforated Leather Sneakers Size 37.5 Eb0924loxsa Valentino rockstud Flat flip flop sandals Size 37 Made In Italy US 6.5/7 Valentino Logo Midnight Black Virgin Wool Scarf 16” x 63” Plus 3” Fringe Italy Valentino SHW Tote Bag Calfskin Leather/Canvas Multicolor Valentino Garavani Red Leather Side Bow Slingback Sandal Open Toe Size IT 35 US5 Valentino Garavani Peep Toe Patent Yellow Leather Heels 5” Sz 9.5 Valentino Bow Ribbon Pump Heels Patent Leather Black Size 7 US, 37 IT Valentino red embellished party dress size 4 Valentino Shoes 39.5 Calf Skin Pumps Valentino Skirt Sz 8 Vintage Velvet Quilted Straight Pencil Green Color Lined Valentino Garavani Rockstud Fringe Mules Heels Shoes Sandals £580 EU 39 UK 5 Auth VALENTINOGARAVANI Rockstud – Pink Pink Beige Patent Leather Leather Sandals VALENTINO Boutique Womens ITALIAN WOOL Jacket Blazer Size 4 Pink SOFT Button Authentic Valentino VALENTINO Cut dress #270-003-910-9177 Valentino Red Valentino Pink Knit Shift Dress S Valentino Garavani Womens PM Thong Pink Thong Sandals 40 Medium(B,M) BHFO 2682 Valentino By Mario Valentino Clara Monogram Leather Pump Women’s $545 VALENTINO GARAVANI Nude Velvet Ballerina Rockstud Velvet Flats 6.5 – 7/ 37 Valentino Vlogo 60 Leather Sandal Women’s Valentino Garavani Riding Boots Flat Knee High Tall Fringe Black 35/4.5-5 $1845 RED BY VALENTINO TWEED FLATS WITH BOW SZ 37.5 = 6.5 VALENTINO Belted Fit and Flare Mini Dress size IT 46 Black Valentino Garavani White Leather Beaded Lucite Sandal Block Heels 39/8.5 Valentino Women’s Tabitha Gold Slide Sandal Size 10 Valentino Red Valentino Taffeta Bow Detail Jacket in Black Silk Valentino Ruffle V-neck Dress Size 6 Sleeveless Shift Cocktail Night Out Peplum Pre-Owned Valentino Ivory Leather wedge with Rock Stud Accents Valentino Garavani size 36 sandal heels brown t strap faux tortoise/silver 1 1/2 Amazing NWT RED VALENTINO Black Bubble Hem/Bow Decorated Sleeveless Dress Sz 44 Valentino Metallic Light Purple Nuage Bow Tote Handbag VALENTINO GARAVANI Sandals BlackxCharcoal grayxSilver etc. 2200372199205 Red Valentino Size 44 / US 6 Black Silk Sleeveless Ruffled Cocktail Dress Used Valentino Garavani Pumps Heel Suede Brown EU36 US6 Japan F/S VALENTINO Rockstud Clutch Bag #Rc4219 VALENTINO GARAVANI Black Lace Up Leather Trimmed Velver Sandals Size 36.5 Boho RED VALENTINO Coat (Other) Navy 42(Approx. M) 2200406367075 Valentino Boutique MI Italy Luxury dove gray and off white silk blouse 6-8 VALENTINO Monogram Beige Leather Pumps Heels Shoes ITALY 9M $1690 Valentino Women’s Pink Silk Long Sleeve Self-Tie V-Neck Blouse Top Size 40 Valentino Garavani Patent Leather Shoulder Bag Purse or Clutch Black Ruffles Valentino Flower Cut-Out Dress – White – Size 6 Valentino rockstud cut out t-strap black VALENTINO VNTG BROWN SATIN 4” HEELS GOLD TONE & RHINESTONE FLOWER OPEN TOE 38.5 Vintage Valentino Navy Blue Wool Skirt Size 10 Valentino Rockstud 60 Leather Sandal Women’s Pink 40 4 Vials Valentino Voce Viva Eau de Parfum Spray 1.2 ml/0.04 fl oz Ea. Free Ship/ Valentina Assoluto by Valentino 1.7 oz 50ml EDP Intense Sealed Box Valentino Garavani 5mm Roman Stud Slide Nappa Size 9.5 US SET OF ROCK’N ROSE VALENTINO THE COLLECTION 3 VIALS 2 ML Each In Travel Box Valentino Black Short Sleeve Lace Inset A-Line Dress Size XS Valentino Rockstud Nylon Double Strap Espadrille Sandals Black Size 38 NEW Valentino Donna Born In Roma 0.5oz/15ml Eau De Parfum for Women Free Ship VALENTINO GARAVANI Lace Ribbon Pumps High Heel Open Toe size 37 Black Stiletto Valentino Dress Large Wool Silk Knit Knee Length Tank Pleated Cream Beige Valentino Leather Silver Rock Stud Slides EU36 US6 Valentino Donna Born In Roma INTENSE Eau de Parfum MINI Splash 6ml/0.2oz NIB Valentino Uomo Born In Roma Green Stravaganza For Men 3.4 oz/100ml EDT Valentino By Mario Bugola Logo Black Leather Slip On Flat Slides 37 Red Valentino Shift Dress, Tag, Size 40, Purple Black Amoeba, Women’s Designer Valentino Elegant Black Womens V-Neck Ruched Dress 4 Italy Fine Rosette Accent Valentino Classic by Valentino 75 ml/ 2.5 oz Eau de Parfum Spray (T) Valentino Garavani Rockstud Black Platform Pumps Heels Size 36.5 FLAWS Valentino Garavani Roman Stud Wool Shearling Slide Sandals US 6/Eur 36 New sz 9 / 39 Valentino Garavani Gold Sequined Slingback In-Heel Pump Shoes VALENTINO GARAVANI Rockstud Leather Tote 2way Bag Red made in ItalyⓁ Valentino Garavani VLogo Signature Rubber Thong Sandals – Size 37 (7) NDS Valentino Garavani Brown Designer Luxury Hand Shoulder Bag (EXCELLENT) VALENTINO Calfskin Rock Studs Heel Sandals Mules Shoes Women EU 37 Beige New Red Valentino Flower Puzzle Stud Leather Slide Sandals 10U.S./40Eu MSRP$529 Valentino by Mario Valentino Afrodite Quilted Leather Sandals Orange Size 7! Valentino Donna Born in Roma Green Stravaganza 3.4 oz EDP $425 Valentino Garavani Women Gold Studded Jelly Flat Thong Sandal EU 40/US 10 Valentino Donna Born In Roma Intense 3.4 oz EDP Spray For Women NEW IN BOX VALENTINO Black Wool Pencil Straight Midi Skirt Size 36 New Valentino Orlandi Red & Gold Hardware Chain Crossbody Bag – Faux Leather Valentino Garavani Upflair Feather Ankle Wrap Heels 6.5 US 36.5 EU VALENTINO GARAVANI Braided Shoulder Bag Leather Black Used VALENTINO GARAVANI “BOW” Black Satin open toe pumps Size 39.5 New RED Valentino Black Mini Sleeveless Dress Size IT 40 Small Metallic Grommet 3 Pcs Valentino Donna & Uomo Born in Roma EDP Set 6ml/ 0.2 fl oz with Pouch, NIB Valentino Donna Born in Roma Yellow Dream – Splash 0.2 oz – NWOB VALENTINO Beaded Shirt Peace T-Shirt One Size $1,400 Retail Natale Tee Auth VALENTINOGARAVANI Rockstuds 23 shoulder bag – Black Leather Shoulder Bag VALENTINO GARAVANI women’s shoes (RED) 36 ½ EU – NEW IN BOX – Authentic – Italy VALENTINO GARAVANI -NEW- Black Velvet Lace-Up Leather Flat Sandal 7 Mens Pullover Fleece Hoodie
